Few vital facts about upgrading your existing emergency light fittings

Few vital facts about upgrading your existing emergency light fittings

In the last few years or so the emergency lighting market has changed drastically. Hardly a few years back there was just a handful number of brands and much less option for consumers. Now all that has changed and changed for better with evolution of cutting-edge technologies. So what is the actual takeaway? Thanks to the latest evolutions the industry has undergone now it is easier, faster and more cost effective to install, upgrade and maintain the latest range of products. This is the right time to venture forward to upgrade your existing emergency lighting. 

For more information, click here: Kohler Kitchen Accessories

But first let us discuss few challenges that people usually faced in the past while upgrading emergency lights in different sites. Upgrading emergency lighting in the six types of sites discussed below used to be most challenging.

Sites that are small and have constrained budget

Small sites are easier to upgrade in terms of emergency lighting. These tasks are also quite straightforward and lack complexities. Small sites also involve minimal disruption. You can do the entire site just in one go. In other words the work is done pretty faster. However budget is the main hurdle that one has to overcome in upgrading small sites. Usually there is hardly much cash around in these sites to facilitate upgrading of emergency light fittings. In most cases funds that are available are challenged into other areas of priority.

Sites that are big and far-stretched are also difficult to upgrade

Usually the bigger a site the more complicated is the task of upgrading emergency light fittings. Suppose there is a site that has 5,000 fittings on it. This is a vast site compared to another that has only 50 fittings. The overall cost of emergency lighting upgrade in the site with larger number of fittings is also much higher. You need a bigger team to work the upgrading project and there will be more parts to deal with. In other words there is much more complexity to handle.

In order avoid complexity upgrading emergency light fittings for many larger sites are simply put on hold until and unless a compliance issue arises. Even the level of complexity is likely to increase depending on how a building is used. A small example will be helpful in understanding this fact better.

Suppose there is an office building that has innumerable tenants on each floor. In this case you have to notify the occupants in advance to ensure minimal disruption. As far as a large sports stadium is concerned, the fittings are usually located further apart. The fittings could even be difficult to access. All these aspects add up to the difficulty of the electrical project.

Campuses

Campuses may include workplace, hospitals, aged care facilities, schools, colleges, universities and much more. The main challenge in upgrading emergency light fittings at these sites is the sites or buildings are usually spread out vastly. Even some could be located in different suburbs or cities hich obviously makes the task even more challenging. You have to deal with a lot of complexities while handling this type of projects.

24/7 sites are also difficult to deal with

24/7 sites include car parking facilities, apartment buildings, hospitals and large shopping centres to name a few. The main challenge in working in this type of sites is there are always people around. There is no way that you simply shut the power supply off for a few hours and get your work done at one go. There has to be sufficient brain storming to find out ways that would create minimal disruption to patients, customers, tenants, employees and everyone else concerned.  

Heritage sites and older buildings

Buildings that came up about hundred years ago were certainly not designed keeping the modern building system in mind. In older buildings and properties access issue is pretty common. In fact this issue becomes even more serious when you have to run hardware cable and new circuits up to the switchboard explains a professional in London who quotes reasonable price for emergency lighting.

With heritage sites there is even greater complexity to deal with. It is crucial to have your upgrade plans approved by relevant authorities. Moreover your project is expected to make minimal interference with the existing structure.

All other sites…

Unfortunately a lot of people simply do not spare a thought about emergency lighting till the time they have to. This is applicable to buildings of every possible size and shape. The majority of property owners do not even prepare a budget for an upgrade until and unless a major compliance issue hits them. 

Now the question is when you should upgrade your emergency lighting system? Let us see what experts have to say about it.

When you should upgrade your emergency lighting system

In a perfect world every device that is installed in a building would last forever. These include emergency lights, exit sings, extinguishers, general lighting and others. But things do not work that way. You may have to upgrade your emergency lighting system every few decades or years. According to experts who provide the service of emergency light fitting that depends on whether the existing system is doing its job fine or not.  

There are some signs that tell you your existing emergency lighting system needs an upgrade.

  • In the circumstance when you are not sure that your building is compliant
  • There is no record of the testing or maintenance work that was done in the past
  • When the cost of managing, maintaining and testing the existing system is comparatively high and is steadily going up with time
  • Any issue with the existing system never gets completely fixed
  • There is consistent difficulty in replacing parts of the existing system
  • Software upgrades for the existing system proves difficult as those are no longer supported
  • The lamps or batteries need to be replaced every year or so
  • Your technical experts are not sure how the system works as there is minimal training and support
  • The products in the existing system are supported no more by their manufacturers and thus the products cannot be maintained properly.
  • Your system includes older components (that are also less efficient) like Ni-Cad batteries, lead acid and others
  • There is a need to modify the layout of your building
  • You want to upgrade your manual process to automation

Professionals who quote reasonable cost for emergency lighting installation have something important to add to the list above. According to them if you are keen about maintaining compliance for your building in that case too upgrading the existing system may become necessary.