Linksys Range Extender Troubleshooting Tips – Explained

Linksys Range Extender

WiFi range extenders are use to make your home router WiFi signals to every corner of your house. Linksys range extender is one of the famous networking devices that most of the users install in their houses.

You can easily complete the Linksys WiFi extender setup with the help of the Ethernet cable and your computer. But if you did not follow simple steps to install the extender carefully, then you can face troubles like extender is not working or device is not receiving internet signals.

Here, you will get to know and learn troubleshooting tips that help you to make the setup process smooth and if you set it up, then these tips dispel any error.

Troubleshooting Tips: Linksys Range Extender

There are five troubleshooting tips in this section of the article, which you can use to dispel any problem related to extender with ease.

Optimal Location For Linksys Range Extender

The internet signal blockage is a big problem, which is caused by electronic devices like microwave ovens. You have to make choose a place where no electronic device is nearby, if your networking device like router and extender is near to any electronic device, then you will face troubles.

Change spot of the networking devices like router and extender to an optimal location in your house.

Don’t Connect Damaged Cables

You can connect your extender to home WiFi router with the help of the Ethernet cable, (you can also link using WPS). You must make sure the connection is established with cable which should not be damaged and cut from anywhere.

Also, you have to check that the wall socket that you are using to supply power to the extender. If it is damaged, then fix it by calling an electrician.

Configure Linksys Range Extender Carefully

Linksys Range extender can easily be configured by accessing the interface of Linksys with the help of computer. You just have to connect the computer to the extender via LAN cable. Go to web browser and access the interface using the URL extender.linksys.com. Adjust the settings and networks. You have to make choose a place where no electronic device is nearby.

Reboot Once in Two Weeks

The extender helps router to expand signals. But it can overheat or suddenly stops working if the system is not refreshed. So, you must reboot the extender once in a week to refresh the device settings and system. To restart the device, you have to the press the power On/Off button twice.

Perform Reset Process If Issue is Big

Resetting the range extender will delete the settings and data memory. But it is effect full to dispel any big technical problem. You can easily reset the device by long pressing the reset pinhole button using a pen or pin.

To adjust the Linksys range extender settings and networks, you have to follow same steps you have applied at the Linksys RE6400 setup.

Some Extra Tips

The extender helps router to expand signals. But it can overheat or suddenly stops working if the system is not refreshed. You can also check some more reasons of problem related to the extender are router to the modem connection, router to extender, extender is running on latest version of the firmware.

End Section

Here in this article post, you have learned about troubleshooting tips that help you to establish a strong extender network in your house. These tips are includes shifting Linksys range extender to optimal location, using cables which are in good condition, rebooting the device, perform reset process, and some extra solutions.

More- How to Establish Netgear Powerline Connection with Router?